Images
Cheek Weld Pad
Accuracy International ATX / ATXC Cheek Weld Pad
$19.99
USDMicrocellular foam/3M adhesive/Laser cut for your stock/Made in Colorado
The AI ATX and ATXC chassis are precision rigs, but the cheek piece is bare polymer. This pad gives you somewhere softer to plant. Cut to fit the AI chassis, stays clear of the bolt throw, won't push your eye position around behind the scope.
Also commonly called a cheek riser or cheek pad.
Materials
- Foam
- Engineered microcellular polyurethane, the kind used in aerospace, performance footwear, and medical applications. It absorbs vibration and impact under recoil, doesn't pack down or take a permanent set, and stays breathable so it won't go soggy on a hot range day.
- Adhesive
- High-end 3M, not the no-name backer most pads ship with. Combined with the warm-press install procedure, it's what keeps the pad where you put it.
- Origin
- Every component is American-made. The foam comes from a US manufacturer. The adhesive is 3M. Every pad is laser-cut and packed by hand at our workshop.
Fit
Every pad is laser-cut to a specific stock (Magpul MOE, MOE SL-M, B5 SOPMOD, Accuracy International, and others) with alignment marks at top and bottom center for repeatable placement. Some SKUs include alignment holes that line up with the stock's geometry. There is no scissors step. The pad is shaped for your rifle before it leaves the workshop.
Installation
- 01Unload and clear your firearm.
- 02Clean the stock's comb with isopropyl alcohol and let dry.
- 03Warm both the adhesive side of the pad and the stock surface to 150°F / 65°C with a heat gun or high-powered hair dryer.
- 04Line up the alignment marks at top and bottom center.
- 05Press from the center outward and hold for thirty seconds.
- 06Allow 24 hours to cure before shooting.
Shipping & Returns
Every order ships from our Colorado workshop within five business days, USPS or UPS depending on weight and destination. You'll get a tracking number as soon as your label is printed.
- Free shipping on orders $30 and up.
- 30-day returns on unused items in their original packaging.
Installation
Three steps. Five minutes.
Surface prep, heat, and pressure. Get these right and the pad becomes part of the stock.
- 01
Clean and align.
Wipe the stock with isopropyl alcohol. Dry-fit the pad first, using the alignment marks at top and bottom center to set placement. If your stock and pad both have a hole, line them up as a second reference.
- 02
Warm to 150°F.
Warm the stock surface and the pad's adhesive backing to roughly 150°F with a heat gun, high-powered hair dryer, or space heater. Heat is the most important part of the install.
- 03
Press from the center.
Align the top and bottom marks to the center of the stock and press the middle down firmly. Do not stretch the pad. Work outward, pressing the full adhesive surface into the stock, then lock down every edge. Wait 24 hours to cure before you shoot.
How we build
Engineered for performance.
- 01Engineering
Built around real use
Built around real use, not catalog filler.
- 02Precision
Repeatable by design
Repeatable patterns, fit checks, and finished parts.
- 03Quality
Chosen for the job
Materials chosen for use, wear, and feel.
- 04US-Made
Built here, honestly
Colorado-built with American-made components whenever possible.
Free Shipping
Free shipping on orders $30 and up. Ships within 5 business days from our workshop, anywhere in the US.
30-Day Returns
Not the right fit? Send it back within 30 days, unused and in its original packaging, for a full refund.
